安全島模具　 安全島鋼模具拋光性能好所以對模具行腔內壁要求很高，粗糙度非常小，以適應塑料表面良好光澤度的要求，對此，對模腔一般要進行拋光處理，表面越亮越好，為此，要求模具材料易于拋光，所以選用的材料不應該有雜質和氣孔等缺陷。安全島模具　 安全島鋼模具基本知識：模具規格一般為長度4米的，采用3部分主體結構，所以該模具是一種組合形式的，這樣能夠**整體現澆的方便性；使用鋼板厚度為面板4毫米，筋板5毫米，這樣在重復使用的時候不會發生變形的現象。
Safe island mold, safe island steel mold polishing performance is good therefore the mold row cavity inner wall request is very high, the roughness is very small, in order to adapt to the plastic surface good gloss request, regarding this, generally must carry on the polishing treatment to the mold cavity, the surface is brighter the better, for this reason, mold materials are required to be easy to Polish, so the materials selected should not have impurities and pores and other defects. Safety Island Mold, Safety Island Steel Mold Basic Knowledge: Mold specifications are generally 4 meters in length, using 3 parts of the main structure, so the mold is a combination of the form, so as to ensure the convenience of the whole casting; The thickness of the steel plate is 4 mm for the face plate and 5 mm for the rib plate, so that the deformation will not occur when the steel plate is reused.

 安全島模具在生產制作產品的時候，使用的材料非常常見，就是我們生活中常使用的混凝土，混凝土的使用非常頻繁，混凝土的購買非常容易，一般各地都有出售的，所以我們在生產的時候，不管是預制生產還是現澆生產制作。安全島模具我們必須要把這些模具產品的合理的蓋上一些防曬布，因為在夏季7月份的天氣的問題是相當的高的，這樣一來就在很大的程度上面可能導致一些模具產品的長時間收到高溫的影響么人導致模具產品的變形。
Safety Island mold in the production of products, the use of materials is very common, that is, we often use concrete in life, concrete is used very frequently, concrete purchase is very easy, generally sold everywhere, so when we are in production, whether it is prefabricated production or cast-in-place production. Safety Island molds we have to cover these molds properly with some sun screens because the weather in summer and July is quite high, in this way, to a large extent, may lead to a number of mold products for a long time to be affected by high temperature, so that the mold product deformation.